Earth & Water

Colors in the order they go on

Tools

• Medium Round Brush
• Fan Brush
• Paint Palette/Dishes

Prep your piece

• Before you get started, be sure there's no dust on your piece. A dry or suuuper damp sponge can help get any excess dust you find off.
• Next, use a water-based marker to draw a line around the foot (bottom) of the piece - this is the do not paint line. Anything glazed below that line will stick to our kiln shelves and ruin your work (sad for everyone).
• Lastly, be sure to let your glazes dry fully between coats. Otherwise, we might end up with issues during firing such as pinholing or crawling.

Here's how tap a step when it's done

1. 1Glaze the outside of your piece, up to the "do not paint" line, with 2 coats of Honeycomb. Note: if you're a light handed painter, you might need to go for 3 coats.
2. 2Glaze the inside of your piece with two coats of Clear Flux.
3. 3Paint two coats of Ivy on the top 1/2" of the outside rim.
4. 4Paint three coats of Ivy on the top 1" of the inner rim.
5. 5Ask us how to sign your work then leave it with us for firing!